Shopping Cart

0 item(s) - RM0.00
Your shopping cart is empty!
Monochrome 1.3" 128x64 OLED graphic display

Monochrome 1.3" 128x64 OLED graphic display

Product Code:ADA938
Reward Points:9
Price: RM98.00

    These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

    The driver chip, SSD1306 can communicate in two ways: I2C or SPI. The OLED itself require a 3.3V power supply and 3.3V logic levels for communication, but we include a 3.3V regulator and all pins are fully level shifted so you can use with 5V devices!

    The power requirements depend a little on how much of the display is lit but on average the display uses about 40mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that turns 3.3v-5v into a high voltage drive for the OLEDs.

    We have a detailed tutorial and example code in the form of an Arduino library for text and graphics. You'll need a microcontroller with more than 1K of RAM since the display must be buffered. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 1K of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller.

    Please note that OLED displays are made of hundreds of...OLEDs! That means each pixel is a little organic LED, and if its kept on for over 1000 hours it'll start to dim. If you want to keep the display uniformly bright, please turn off the display (set the pixels off) when it isn't needed to keep them from dimming.


    Breakout Board Dimensions:

    • PCB: 35mm x 35mm x 5mm / 1.4" x 1.4" x 0.2"
    • Mounting Hole Dimensions: 29.5mm x 29mm / 1.16" x 1.14"
    • Mounting Hole Diameter: 2.5mm / 0.1"
    • Screen: 23mm x 35mm / 0.9" x 1.4"
    • Weight: 8.5g
    • This board/chip uses I2C 7-bit address between 0x3C-0x3D, selectable with jumpers


    Monochrome OLED Breakouts
    Using our small mono-OLED displays
    OLED TRON Clock
    Display the current time in style.
    Here is how to use an Adafruit monochrome OLED display with your Raspberry Pi. What can I say? Good things come in small packages!
    SSD1306 OLED Displays with Raspberry Pi and BeagleBone Black
    Add a beautiful, bright OLED display to your Raspberry Pi or BeagleBone Black project!